INMATECO

Paving with precast concrete made with recycled mixed ceramic aggregates: A viable technical option for the valorization of construction and demolition wastes (CDW)

Materials, Vol. 12, Núm. 1

Influence of the use of external carbon fiber reinforcement on the flexural behavior of prismatic concrete test specimens. An application for repairing of deteriorated agricultural structures

Materials, Vol. 12, Núm. 12

Quality improvement of mixed and ceramic recycled aggregates by biodeposition of calcium carbonate

Construction and Building Materials, Vol. 154, pp. 1015-1023

Fracture energy of coarse recycled aggregate concrete using the wedge splitting test method: influence of water-reducing admixtures

Materials and Structures/Materiaux et Constructions, Vol. 50, Núm. 2

Mechanical and microstructural characterization of non-structural precast concrete made with recycled mixed ceramic aggregates from construction and demolition wastes

Journal of Cleaner Production, Vol. 180, pp. 482-493

Analysis of the mechanical properties of wood attacked by Xylotrechus arvicola (Coleoptera: Cerambycidae) larvae, and its influence on the structural properties of the plant

Vitis - Journal of Grapevine Research, Vol. 58, Núm. 3, pp. 05-112

Non-linear interface thermal conditions in three-dimensional thermoelastic contact problems

Computers and Structures, Vol. 241

Thermoelastic influence of convective and conduction interstitial conditions on the size of the contact zone in three-dimensional receding thermoelastic contact problem

Acta Mechanica, Vol. 231, Núm. 7, pp. 3065-3084

A boundary element procedure to analyze the thermomechanical contact problem in 3D microelectronic packaging

Engineering Analysis with Boundary Elements, Vol. 115, pp. 28-39

Effect of surface biotreatments on construction materials

Construction and Building Materials, Vol. 241

Recycling aggregates for self-compacting concrete production: A feasible option

Materials, Vol. 13, Núm. 4

Failure under stress of grapevine wood: The effects of the cerambycid xylotrechus arvicola on the biomechanics properties of vitis vinifera

Maderas: Ciencia y tecnología, Vol. 22, Núm. 2, pp. 167-178

Mechanical and microstructural properties of recycled concretes mixed with ceramic recycled cement and secondary recycled aggregates. A viable option for future concrete

Construction and Building Materials, Vol. 270

Influence of design parameters on fresh properties of self-compacting concrete with recycled aggregate—a review

Materials, Vol. 13, Núm. 24, pp. 1-24

Evaluation of mechanical characteristics of cement mortar with fine recycled concrete aggregates (FRCA)

Sustainability (Switzerland), Vol. 13, Núm. 1, pp. 1-23

Constructionist learning tool for acquiring skills in understanding standardised engineering drawings of mechanical assemblies in mobile devices

Sustainability (Switzerland), Vol. 13, Núm. 6

Use of bioproducts derived from mixed microbial cultures grown with crude glycerol to protect recycled concrete surfaces

Materials, Vol. 14, Núm. 8

Sustainable cement mortar bioformulated with a bioproduct obtained from fermentation of biodiesel’ crude glycerol

Journal of Cleaner Production, Vol. 313

Impact of design parameters on the ratio of compressive to split tensile strength of self‐compacting concrete with recycled aggregate

Materials, Vol. 14, Núm. 13

Effect of design parameters on compressive and split tensile strength of self-compacting concrete with recycled aggregate: An overview

Applied Sciences (Switzerland), Vol. 11, Núm. 13

Self-healing concrete with recycled aggregates

Advances in Construction and Demolition Waste Recycling, pp. 355-383

Estudio de la mejora de la durabilidad de hormigones reciclados con biopolímeros

X Congreso Ibérico de Agroingeniería: Libro de actas

Effects of waste glass and waste marble on mechanical and durability performance of concrete

Scientific Reports, Vol. 11, Núm. 1

Use of mixed microbial cultures to protect recycled concrete surfaces: A preliminary study

Materials, Vol. 14, Núm. 21

Extraordinary Protective Efficacy of Graphene Oxide over the Stone-Based Cultural Heritage

Advanced Materials Interfaces, Vol. 8, Núm. 23

Mechanical performance of concrete reinforced with polypropylene fibers (PPFs)

Journal of Engineered Fibers and Fabrics, Vol. 16

Effects of steel fibers (Sf) and ground granulated blast furnace slag (ggbs) on recycled aggregate concrete

Materials, Vol. 14, Núm. 24

Performance of sustainable self-compacting fiber reinforced concrete with substitution of marble waste (MW) and coconut fibers (CFs)

Scientific Reports, Vol. 11, Núm. 1

Recycled precast concrete kerbs and paving blocks, a technically viable option for footways

Materials, Vol. 14, Núm. 22

Proyecto de mejora docente enseñanza-aprendizaje en expresión gráfica en ingeniería mediante uso de nuevas tecnologías

Educação: teorias, métodos e perspectivas. Vol II (Artemis), pp. 268-284

A study on the microstructure and durability performance of rubberized concrete with waste glass as binding material

Journal of Building Engineering, Vol. 49

Experimental Research on Mechanical and Permeability Properties of Nylon Fiber Reinforced Recycled Aggregate Concrete with Mineral Admixture

Applied Sciences (Switzerland), Vol. 12, Núm. 2

Concrete with Partial Substitution of Waste Glass and Recycled Concrete Aggregate

Materials, Vol. 15, Núm. 2

Mechanical properties and durability assessment of nylon fiber reinforced self-compacting concrete

Journal of Engineered Fibers and Fabrics, Vol. 16

Biotreatments Using Microbial Mixed Cultures with Crude Glycerol and Waste Pinewood as Carbon Sources: Influence of Application on the Durability of Recycled Concrete

Materials, Vol. 15, Núm. 3

Diseño de instalaciones para la recarga de vehículos eléctricos

Tendencias medioambientales en el ámbito universitario: I Congreso nacional de TFG Y TFM ambientales "Tendencias medioambientales en el ámbito universitario", Burgos 7-9 noviembre 2019

Utilización de grabaciones de sesiones docentes para el apoyo en el repaso de conceptos previos

IX Congresso Ibérico de Agroengenharia: Livro de Atas

A Framework for the Optimization of Complex Cyber-Physical Systems via Directed Acyclic Graph

Sensors, Vol. 22, Núm. 4

Long-term environmental bending behaviors and service LIFE prediction of KEVLAR fiber mat epoxy composite

Polymer Composites, Vol. 43, Núm. 4, pp. 2396-2407

Determining the tribological features of concrete and assessing the service life of architectural facilities

Journal of Measurements in Engineering, Vol. 9, Núm. 4, pp. 207-217

Biodegradable Polymers on Cementitious Materials

Current Topics and Trends on Durability of Building Materials and Components - Proceedings of the 15th International Conference on Durability of Building Materials and Components, DBMC 2020

3D thermoelastic solids under non-linear interface thermal and orthotropic frictional contact conditions

International Journal for Numerical Methods in Engineering, Vol. 123, Núm. 11, pp. 2631-2659

To predict the compressive strength of self compacting concrete with recycled aggregates utilizing ensemble machine learning models

Case Studies in Construction Materials, Vol. 16, pp. e01046

Mechanical performance of sustainable high strength ductile fiber reinforced concrete (HSDFRC) with wooden ash

Scientific Reports, Vol. 12, Núm. 1

Waste Foundry Sand in Concrete Production Instead of Natural River Sand: A Review

Materials, Vol. 15, Núm. 7

Application of polyfunctional nanomaterials for 3D printing

Polymer Composites, Vol. 43, Núm. 5, pp. 3116-3123

Author Correction: Mechanical performance of sustainable high strength ductile fiber reinforced concrete (HSDFRC) with wooden ash (Scientific Reports, (2022), 12, 1, (4306), 10.1038/s41598-022-08134-y)

Scientific Reports

Characteristics of high-performance steel fiber reinforced recycled aggregate concrete utilizing mineral filler

Case Studies in Construction Materials, Vol. 16

To determine the performance of metakaolin-based fiber-reinforced geopolymer concrete with recycled aggregates

Archives of Civil and Mechanical Engineering, Vol. 22, Núm. 3

Characteristics of Sustainable Concrete with Partial Substitutions of Glass Waste as a Binder Material

International Journal of Concrete Structures and Materials, Vol. 16, Núm. 1

Effect of pores on the mechanical and durability properties on high strength recycled fine aggregate mortar

Case Studies in Construction Materials, Vol. 16

Impact of sulfate activation of rice husk ash on the performance of high strength steel fiber reinforced recycled aggregate concrete

Journal of Building Engineering, Vol. 54

Prediction of Splitting Tensile Strength of Self-Compacting Recycled Aggregate Concrete Using Novel Deep Learning Methods

Mathematics, Vol. 10, Núm. 13

Satisfaction Level of Engineering Students in Face-to-Face and Online Modalities under COVID-19—Case: School of Engineering of the University of León, Spain

Sustainability, Vol. 14, Núm. 10, pp. 6269

Macroscopic mechanical characterization of self-compacting recycled concrete mixed with natural lime filler

The Structural Integrity of Recycled Aggregate Concrete Produced With Fillers and Pozzolans (Elsevier), pp. 303-322

Influence of Wheat Straw Ash as Partial Substitute of Cement on Properties of High-Strength Concrete Incorporating Graphene Oxide

Journal of Materials in Civil Engineering, Vol. 34, Núm. 11

ML models and neural networks for analyzing 3D data spatial planning tasks: Example of Khasansky urban district of the Russian Federation

Advances in Engineering Software, Vol. 173

Thermomechanical Optimization of Three-Dimensional Low Heat Generation Microelectronic Packaging Using the Boundary Element Method

Mathematics, Vol. 10, Núm. 11, pp. 1913

A Study on the Prediction of Compressive Strength of Self-Compacting Recycled Aggregate Concrete Utilizing Novel Computational Approaches

Materials, Vol. 15, Núm. 15

The Present State of the Use of Waste Wood Ash as an Eco-Efficient Construction Material: A Review

Materials, Vol. 15, Núm. 15

1967-2017 Cincuentenario Escuela de Ingeniería Agraria

Universidad de León

Herramienta construccionista de adquisicion de competencias en la representación normalizada de conjuntos mecánicos de Ingeniería: basada en realidad aumentada para dispositivos móviles

Premios a la innovación en la enseñanza, Núm. 21, pp. 9-62

A Comparison of Machine Learning Tools that Model the Splitting Tensile Strength of Self-Compacting Recycled Aggregate Concrete

Materials, Vol. 15, Núm. 12

Optimization of a Laboratory Rainfall Simulator to Be Representative of Natural Rainfall

Water (Switzerland), Vol. 14, Núm. 23

Innovative approach for the protection of recycled concrete by biogenic silica biodeposition

Construction and Building Materials, Vol. 368

Statistical Study of the Effectiveness of Surface Application of Graphene Oxide as a Coating for Concrete Protection

Coatings, Vol. 13, Núm. 1

A sustainable production of natural hydraulic lime mortars through bio-amendment

Construction and Building Materials, Vol. 340

Recycled aggregates and their properties

Recycled Concrete: Technologies and Performance (Elsevier), pp. 119-159

Comportamiento mecánico de la madera de vid afectada por Xylotrechus arvicola

Maderas: Ciencia y tecnología, Vol. 25, Núm. 1

Influencia regional de la carga de nieve en el coste de pórticos de acero

Ingeniería civil, Núm. 199, pp. 83-90

A study of the radiation thermal boundary conditions influence in three-dimensional thermomechanical contact problems

Engineering Analysis with Boundary Elements, Vol. 155, pp. 121-139

Biodeposition of Diatoms in Recycled Aggregates

Springer Proceedings in Earth and Environmental Sciences (Springer Nature), pp. 327-334

Circular Economy Policies in the Concrete Production

Springer Proceedings in Earth and Environmental Sciences (Springer Nature), pp. 433-438

The Application of Nanotechnology in the Development of Concrete Coatings

Springer Proceedings in Earth and Environmental Sciences (Springer Nature), pp. 398-402

Boundary element analysis of three-dimensional thermomechanical orthotropic frictional contact problems

AIP Conference Proceedings

A Study on the Properties of Geopolymer Concrete Modified with Nano Graphene Oxide

Buildings, Vol. 12, Núm. 8

Improving the performance of recycled concrete by biodeposition of biogenic silica as a surface coating

Construction and Building Materials, Vol. 408

To determine the compressive strength of self-compacting recycled aggregate concrete using artificial neural network (ANN)

Ain Shams Engineering Journal, Vol. 15, Núm. 2

Ecologías del lúpulo: banco de memoria

Colecciones científicas: patrimonio natural y cultural único para la investigación presente y futura: IV Simposio de la Sociedad Botánica Española (Universidad de León), pp. 84

Performance of graphene oxide as a water-repellent coating nanomaterial to extend the service life of concrete structures

Heliyon, Vol. 10, Núm. 1

“Un clic diario y a por el temario”

Innovación docente en la Universidad de León (Servicio de Publicaciones), pp. 141-148

Surface protection of recycled concrete from different biogenic silica bio-deposition techniques: A sustainable approach

Journal of Building Engineering, Vol. 84

Microstructural, durability and colorimetric properties of concrete coated with a controlled application of graphene oxide

Journal of Building Engineering, Vol. 86

Development of biogenic silica biocoatings to improve the performance of recycled aggregate concrete

Construction and Building Materials, Vol. 424

Impact of Wood-Boring Larvae of Xylotrechus arvicola (Coleoptera: Cerambycidae) on Mechanical Properties of Vitis vinifera Plants

Horticulturae, Vol. 10, Núm. 5

Effective section on grapevine plants (Vitis vinifera L.) attacked by Xylotrechus arvicola Olivier (Coleoptera: Cerambycidae) grubs: Influence and effects on its resistance

Heliyon, Vol. 10, Núm. 16

BEM formulation for simulating heat dissipation in microelectronic packaging with point heat sources

Engineering Analysis with Boundary Elements, Vol. 171

Effect of bonding defects on heat transfer and creep response of microprocessor-heatsink adhesive joints

Journal of Materials Science: Materials in Electronics, Vol. 36, Núm. 1