TAFI

Using Educational Robotic Exoskeleton for the Acquisition of Cross-Curricular Competences in Higher Education

ACM International Conference Proceeding Series

3D-Printed Conductive Polymers as Alternative for Bioelectrochemical Systems Electrodes: Abiotic Study and Biotic Start-Up

Applied Sciences (Switzerland), Vol. 14, Núm. 16

Automated Shrinkage and Gas Porosity Detection Using YOLO Model in Additive-Manufactured Aluminum Alloy Parts

Integrating Materials and Manufacturing Innovation

Estimation of arithmetical mean roughness using a regression approach and computer vision in stainless steel specimens manufactured by additive manufacturing

International Journal of Computer Integrated Manufacturing

Automatic classification of pores in aluminum castings using machine learning

XLIV Jornadas de Automática: libro de actas: Universidad de Zaragoza, Escuela de Ingeniería y Arquitectura, 6, 7 y 8 de septiembre de 2023, Zaragoza

MEX and VPP-UVL Technologies for Printing Complex Alumina Parts

2ND INTERNATIONAL WORKSHOP ADDITIVE MANUFACTURING AND SUSTAINABILITY (IWAM 2024)

Microstructural transformation and defect analysis in alumina ceramics components manufactured by stereolithography additive manufacturing technology

International Journal of Advanced Manufacturing Technology

New trends of additive manufacturing using materials based-on natural fibers and minerals : A systematic review

Heliyon, Vol. 11, Núm. 2

Additive Manufacturing of Ceramic Reference Spheres by Stereolithography (SLA)

Applied Sciences (Switzerland), Vol. 14, Núm. 17

Analysis of gaseous emission and particle number size distributions in metal casting processes with binder jetting moulds

Building and Environment, Vol. 252, pp. 111297

Coordinación vertical entre las asignaturas de Ciencia de Materiales e Ingeniería de la Fabricación impartidas en cursos sucesivos en el Grado en Ingeniería Minera

Premios a la innovación en la enseñanza, Núm. 23, pp. 72-112

Enhancing wear performance: A comparative study of traditional vs. additive manufacturing techniques for 17–4pH SS

Wear, Vol. 540-541

Fused filament fabrication of partially stabilized zirconia (3Y-TZP) parts

Materials Letters, Vol. 355

Influence of point cloud filtering on optical inspection of additive manufactured metal parts

Precision Engineering, Vol. 90, pp. 12-20

Laser Triangulation Sensors Performance in Scanning Different Materials and Finishes

Sensors, Vol. 24, Núm. 8

Optimizing the Material Extrusion Process for Investment Casting Mould Production

Journal of Manufacturing and Materials Processing, Vol. 8, Núm. 6

Analysis of Printing Parameters for Sheet Metal Bending with FDM Printed Tools

Key Engineering Materials (Trans Tech Publications Ltd), pp. 29-36

Automatic wear detection on normalized gears made by additive manufacturing from dense 3d point clouds

Advances in Science and Technology

Characterisation of the Performance of a Structured Light Digitising Sensor by Using Different Materials and Surface Finishes

Key Engineering Materials (Trans Tech Publications Ltd), pp. 151-159

Comparison between the Effects of Normal Rain and Acid Rain on Calcareous Stones under Laboratory Simulation

Hydrology, Vol. 10, Núm. 4

Creación e implementación de Entornos Virtuales para mejorar los procesos enseñanza-aprendizaje en las Prácticas de Laboratorio

Modelling in Science Education and Learning, Vol. 16, Núm. 1, pp. 43-54

Design of Supports to Avoid Deformations in the Process of Alumina Printing by Stereolithography

Key Engineering Materials (Trans Tech Publications Ltd), pp. 67-75

Heat treatments of 17-4 PH SS processed by SLM to improve its strength and biocompatibility in biomedical applications

Journal of Materials Research and Technology, Vol. 26, pp. 3524-3543

Influence of Post-Processing on the Properties of Multi-Material Parts Obtained by Material Projection AM

Polymers, Vol. 15, Núm. 9

Inspección de productos de fabricación aditiva: medición e instrumentos

Fabricación aditiva (UNED - Universidad Nacional de Educación a Distancia), pp. 423-453

Machinability of Selective Laser Melted 17-4 PH Stainless Steel in Turning Process

Key Engineering Materials, Vol. 956, pp. 127-133

Optimization of Sandblasting to Improve the Surface Finish of 17-4PH Parts Manufactured by SLM Using Different Laser Scanning Strategies

Key Engineering Materials (Trans Tech Publications Ltd), pp. 97-103

Performance Study of Graphene Oxide as an Antierosion Coating for Ornamental and Heritage Dolostone

Advanced Materials Technologies, Vol. 8, Núm. 18

Procesos de fabricación aditiva de piezas cerámicas

Fabricación aditiva (UNED - Universidad Nacional de Educación a Distancia), pp. 301-329

Survival and grade of the glioma prediction using transfer learning

PeerJ Computer Science, Vol. 9

Comparison of Chemical and Mechanical Surface Treatments on Metallic Precision Spheres for Using as Optical Reference Artifacts

Materials, Vol. 15, Núm. 11

Impact of the laser scanning strategy on the quality of 17-4PH stainless steel parts manufactured by selective laser melting

Journal of Materials Research and Technology, Vol. 20, pp. 2734-2747

Influence of 17-4 PH stainless steel powder recycling on properties of SLM additive manufactured parts

Journal of Materials Research and Technology, Vol. 16, pp. 1647-1658

Metrology Benchmarking of 3D Scanning Sensors Using a Ceramic GD&T-Based Artefact

Sensors, Vol. 22, Núm. 22

Microstructure–Hardness–Corrosion Performance of 17–4 Precipitation Hardening Stainless Steels Processed by Selective Laser Melting in Comparison with Commercial Alloy

Metals and Materials International, Vol. 28, Núm. 11, pp. 2652-2667

Novel post-processing procedure to enhance casting molds manufactured by binder jetting AM

Additive Manufacturing, Vol. 59

Precipitation hardening stainless steel samples processed by additive manufacturing: Process parameters and thermo mechanical treatments effects on microstructure and corrosion resistance

Optics and Laser Technology, Vol. 156

Proposal of design rules for improving the accuracy of selective laser melting (SLM) manufacturing using benchmarks parts

Rapid Prototyping Journal, Vol. 28, Núm. 6, pp. 1129-1143

Comparative study on microstructure and corrosion resistance of al-si alloy cast from sand mold and binder jetting mold

Metals, Vol. 11, Núm. 9

Competencias profesionales adquiridas por los docentes en formación en sus prácticas en escenarios de presencialidad y de no presencialidad

XVI Symposium Internacional sobre el Practicum y las prácticas externas. Prácticas externas virtuales versus presenciales: transformando los retos en oportunidades para la innovación: actas. Poio (Pontevedra) 7, 8 y 9 de julio de 2021

Contact Image Sensor Integration in Fused Filament Fabrication Machines for Layer Inspection

Manufacturing Engineering Society International Conference, MESIC 9: Gijόn, 2021, Spain, June 23-24-25

Correlación entre la porosidad y la estrategia de escaneo láser en piezas metálicas fabricadas mediante Fusión Selectiva por Láser

VII Jornadas de investigadoras de Castilla y León [Recurso electrónico]: la aventura de la ciencia y la tecnología (Fundación 3CIN), pp. 63

Evaluation of Mechanical Properties of FDM Components Reinforced with Fibre

Manufacturing Engineering Society International Conference, MESIC 9: Gijόn, 2021, Spain, June 23-24-25

Evaluation of mechanical properties of FDM components reinforced with fibre

IOP Conference Series: Materials Science and Engineering, Vol. 1193, Núm. 1, pp. 012069

Evaluation of the Influence of Post-Processing on the Optical Inspection Accuracy of Additively Manufactured Parts

Manufacturing Engineering Society International Conference, MESIC 9: Gijόn, 2021, Spain, June 23-24-25

Evaluation of the influence of post-processing on the optical inspection accuracy of additively manufactured parts

IOP Conference Series: Materials Science and Engineering, Vol. 1193, Núm. 1, pp. 012062

Feasibility Analysis of Using Machinable Glass Ceramics to Manufacture Non-Contact Measurement Approach Metrological Artefacts

Manufacturing Engineering Society International Conference, MESIC 9: Gijόn, 2021, Spain, June 23-24-25

Formación docente inicial del profesorado universitario: un estudio de caso

Journal of sport pedagogy and research, Vol. 7, Núm. 7, pp. 82-84

Influence of printing conditions in Binder Jetting on the resin infiltration post-processing

IOP Conference Series: Materials Science and Engineering, Vol. 1193, Núm. 1, pp. 012041

Influence of printing conditions in Binder Jetting on the resin infiltration post-processing

Manufacturing Engineering Society International Conference, MESIC 9: Gijόn, 2021, Spain, June 23-24-25

Integrating BIM in Industrial Engineering Programs: A New Strategy Model

Manufacturing Engineering Society International Conference, MESIC 9: Gijόn, 2021, Spain, June 23-24-25

Integrating BIM in Industrial Engineering programs. A new strategy model

IOP Conference Series: Materials Science and Engineering, Vol. 1193, Núm. 1, pp. 012133

La influencia de la implementación del aprendizaje cooperativo en la motivación y competencia comunicativa de la enseñanza del Inglés como Lengua Extranjera en un centro de enseñanza secundaria

Edunovatic2021. Conference proceedings: 6th Virtual International Conference on Education, Innovation and ICT

Laser defocusing effect on the microstructure and defects of 17-4ph parts additively manufactured by slm at a low energy input

Metals, Vol. 11, Núm. 4

Laser line scanner aptitude for the measurement of Selective Laser Melting parts

Optics and Lasers in Engineering, Vol. 138

Validation of the Sandblasting Process in the Manufacturing of Precision Spheres for Non-Contact Metrology

Manufacturing Engineering Society International Conference, MESIC 9: Gijόn, 2021, Spain, June 23-24-25

“Breakout” como herramienta docente dirigida a la motivación del alumnado de enseñanza secundaria del sistema español

Edunovatic2021. Conference proceedings: 6th Virtual International Conference on Education, Innovation and ICT

/Optimización del proceso de fabricación aditiva de piezas metálicas mediante Fusión Selectiva por Láser y su posterior inspección óptica avanzada

VI Jornadas de Investigadoras de Castilla y León: la aventura de la ciencia y la tecnología (Fundación 3CIN), pp. 44

Analysis of modern optical inspection systems for parts manufactured by selective laser melting

Sensors (Switzerland), Vol. 20, Núm. 11

Analysis of post-processing influence on the geometrical and dimensional accuracy of selective laser melting parts

Rapid Prototyping Journal, Vol. 26, Núm. 10, pp. 1713-1722

Application of vacuum techniques in shell moulds produced by additive manufacturing

Metals, Vol. 10, Núm. 8, pp. 1-20

Characterisation of 17-4PH metallic powder recycling to optimise the performance of the selective laser melting process

Journal of Materials Research and Technology, Vol. 9, Núm. 2, pp. 1273-1285

Feasibility of calcium sulfate moulds made by inkjet 3D printing for rapid casting of aluminium alloys

Metals, Vol. 10, Núm. 6, pp. 1-17

Heat treatments for improved quality binder jetted molds for casting aluminum alloys

Additive Manufacturing, Vol. 36

La coevaluación de la práctica docente universitaria: Una experiencia de éxito

Hacia una educación transformadora: Propuestas, proyectos y experiencias (Adaya Press), pp. 106-117

Raman spectrometry as a screening tool for solvent-extracted azo dyes from polyester-based textile fibres

Polymer Testing, Vol. 91

Towards functional parts by binder jetting calcium-sulphate with thermal treatment post-processing

Materials, Vol. 13, Núm. 17

Analysis of Geometric and Dimensional Stability Over Time of Printed Parts by CJP Additive Technique

Lecture Notes in Engineering and Computer Science

Analysis of microstructure and defects in 17-4 PH stainless steel sample manufactured by Selective Laser Melting

Procedia Manufacturing

Autoevaluación y coevaluación de la práctica docente del profesorado universitario

Revista Infancia, Educación y Aprendizaje, Vol. 5, Núm. 2, pp. 353-358

CNC centralized control for digitizing freeform surfaces by means of a conoscopic holography sensor integrated in a machining centre

Precision Engineering, Vol. 55, pp. 474-483

Comparative study of aluminum alloy casting obtained by sand casting method and additive manufacturing technology

Procedia Manufacturing

Dimensional accuracy analysis of Direct Metal Printing machine focusing on roller positioning errors

Procedia Manufacturing

Improvement Surface Quality of SLM Parts by means of the Combination of Different Scanning Strategies

Lecture Notes in Engineering and Computer Science

Influence of the scanning strategy parameters upon the quality of the SLM parts

Procedia Manufacturing

Las competencias docentes del profesorado universitario: experiencia de evaluación formativa por pares

Edunovatic 2019 conference proceedings: 4th Virtual International Conference on Education, Innovation and ICT: 18-19 December, 2019

Metrological evaluation of laser scanner integrated with measuring arm using optical feature-based gauge

Optics and Lasers in Engineering, Vol. 121, pp. 120-132

Caso de estudio en el procedimiento de un grupo de estudiantes cuando se aplica evaluación formativa en diferentes materias de un grado de Ingeniería

XXVI Congreso Universitario de Innovación Educativa en las Enseñanzas Técnicas: libro de actas

Characterization of materials used in 3D-printing technology with different analysis techniques

Annals of DAAAM and Proceedings of the International DAAAM Symposium

Evaluación formativa de la actuación docente en la universidad: Una experiencia práctica

La evaluación educativa: entre la emoción y la razón

Influence of laser energy in the surface quality of parts manufactured by selective laser melting

Annals of DAAAM and Proceedings of the International DAAAM Symposium

Knowledge base model for automatic probe orientation and configuration planning with CMMs

Robotics and Computer-Integrated Manufacturing, Vol. 49, pp. 285-300

Modelo de evaluación y seguimiento de los trabajos fin de grado (TFG) y trabajos fin de máster (TFM) tutorizados en el área de Ingeniería de los Procesos de Fabricación

XXVI Congreso Universitario de Innovación Educativa en las Enseñanzas Técnicas: libro de actas

New procedure for qualification of structured light 3D scanners using an optical feature-based gauge

Optics and Lasers in Engineering, Vol. 110, pp. 193-206

Analysis of influence factors on part quality in micro-SLA technology

Procedia Manufacturing, Vol. 13, pp. 856-863

Anodic behavior in AlCl3-EMIC ionic liquid of Ti6Al4V alloy and its application for enhancing the adhesion strength of aluminum coatings

Surface and Coatings Technology, Vol. 331, pp. 57-65

Aplicación de la evaluación formativa y por competencias en una práctica específica de laboratorio

Revista Infancia, Educación y Aprendizaje, Vol. 3, Núm. 2, pp. 169-173

Aplicación de la metodología CTMTC para evaluación formativa del trabajo grupal en ingeniería de fabricación

Revista Infancia, Educación y Aprendizaje, Vol. 3, Núm. 2, pp. 499-504

Behaviour of infiltrating materials on Calcium Sulphate hemihydrate parts made by 3D printing

Procedia Manufacturing, Vol. 13, pp. 848-855

Desarrollo y ensayo de un amortiguador de masas sintonizadas para sistemas de catenaria rígida

Revista DYNA, Vol. 92, Núm. 6, pp. 680-687

Evolución de la autopercepción del nivel de adquisición de competencias de los estudiantes de una asignatura de Grado en Ingeniería

Revista Infancia, Educación y Aprendizaje, Vol. 3, Núm. 2, pp. 441-447

La evaluación de competencias y subcompetencias a través de procesos de evaluación formativa con portafolio y rúbricas en el Máster de Formación del Profesorado

Evaluación formativa y compartida en educación: experiencias de éxito en todas las etapas educativas (Universidad de León), pp. 386-401

Metrological evaluation of Structured Light 3D scanning system with an optical feature-based gauge

Procedia Manufacturing, Vol. 13, pp. 526-533

Motivación e implicación de los estudiantes en el proceso de evaluación formativa realizando trabajo en grupo en el aula

Revista Infancia, Educación y Aprendizaje, Vol. 3, Núm. 2, pp. 180-184

Nozzle design for combined use of MQL and cryogenic gas in machining

International Journal of Precision Engineering and Manufacturing - Green Technology, Vol. 4, Núm. 1, pp. 87-95

Optical properties of ThO2–based nanoparticles

Journal of Luminescence, Vol. 184, pp. 169-178

TCM system in contour milling of very thick-very large steel plates based on vibration and AE signals

Journal of Materials Processing Technology, Vol. 246, pp. 144-157